This blog post will answer the question, How to turn off someone’s wifi with cmd? It will also cover how to turn wifi on/off using command prompt. It outlines how cmd can be used to disable peoples wifi using cmd commands. This article also talks about how to hack wifi passwords to turn off someone’s wifi. It also discusses the methods to keep yourself safe from such hacks.
How to turn off someone’s wifi with cmd?
Yes, you can turn off someone’s wifi using cmd. Cmd is a command line interface for windows operating system. This CLI can be used to hack someone’s wifi and turn it off.
To turn off someone’s wifi using the command prompt, you need a laptop with an updated windows operating system and an admin access to the command prompt.
If you want to switch someone’s wifi off, first you will need their wifi password. There are several methods to get someone’s wifi password. There are a lot of wifi password cracking tools and other tricks to achieve this. We are only going to talk about finding out the wifi password and using it to switch off the wifi using only CMD.
We will discuss two scenarios in which you can turn someone’s wifi off. The first one where you are connected to a public wifi which does not have any password and the second scenario where you are connected to a wifi which has a password.
When you are connected to a public wifi, it is very easy to turn the wifi off. Since your laptop is already a part of the network when you are connected to that wifi, it makes it easier for you to see the name of the wireless adapter in the command prompt.
Now to switch the wifi off using the command prompt. First open the command prompt by pressing windows+R button and type cmd in the box. This will open the command line interface.
In the same terminal type the command
wmic nic get name, index
This command will give you a numbered list of all the wifi adapters present in your device.
Now all you have to do is select a targeted network adapter and use the following command to disable it.
wmic path win32_networkadapter where index=(index number of the targeted adapter) call disable
When you type this command and as soon as you hit enter this will disable the wireless network adapter and eventually turning off the wifi
So this was the method to switch off someone’s wifi using cmd, when you are connected to the public wifi. This is a very simple method to disable someone’s wifi using the cmd when you are connected to the public wifi.
In case when you are connected to a private network with a password on, you will first need the password to connect to that particular wifi and only then you can use cmd to turn that wifi off.
In order to turn someone’s wifi off you first need to be connected to that wifi or your laptop must be connected to the same local area network(LAN).
After you have connected to the wifi network and are a part of the local area network, now you can easily find out the password to that wifi.
To check the name and password of the wifi adapter using your command prompt type the following command.
netsh wlan show profile name=” WIFI NAME ” key=clear
Here, the wifi name is the name of the wifi that you are connected to. You can see this in the windows tray at the bottom left corner. Copy the name of the wifi and paste it in the place of the wifi name in the above command and press enter.
For example if the name of the wifi i’m connected to is AndroidAP, then I will type the above command as following
netsh wlan show profile name=” androidAP ” key=clear
Now after you hit enter, this command will show a lot of details of this wifi network. Now you should scroll down to the key content, and the password to that wifi network will be given next to the key content.
Now that you have the password of the wifi network, you can easily switch the wifi off using the CMD. All you have to do now is to run a command to turn the targeted wifi off.
After you have the access to the wifi networks details following the previous steps, you are ready to turn off the wifi of that particular network. All you have to do is to execute the below command.
wmic path win32_networkadapter where index=(index number of the targeted adapter) call disable
After the execution of this command the network adapter will switch off and this results the wifi to be disconnected. These are the two methods to turn someone’s wifi off using the cmd.
Conclusion
This blog post addressed the question, How to turn off someone’s wifi with cmd? We understood how we can use cmd to find the password of a wifi network and all other details. It outlines how a person can use just cmd to turn someone’s wifi off. We also talked about the different methods that can be used in cmd to gain access to someone’s wifi and eventually turn it off.
Frequently Asked Questions (FAQs): How to turn off someone’s wifi with cmd?
Can you shut down someone’s WiFi with their IP?
Yes. someone’s wifi can be shut down using their IP address. Especially if you have rights to their system. You can telnet or ssh in and disable their WiFi from their command line.
If no access, you will need to have access to the router and you can ban their MAC address or just change the Wireless Password or disable the radio their system uses.
How do I disable other people’s WiFi?
You can disables people’s wifi by either accessing their router’s login credentials or if you are already connected to the LAN you can find out the wifi name and password and shut it off.
How To Remotely Disable My Wireless Internet?
- Log in to a computer connected to the local network where the access point is – that is, the same home or office in a computer.
- Obtain the access point for the current external IP address, from its configuration utility. …
- Configure the access point to allow remote logins.
- Launch a web browser on the remote computer from which you want to disable wireless.
- Log in to the access point as administrator, then disable the wireless network.